Steam Deck Runs 32% Cooler With PC Liquid Cooler Mod

Oct 06, 2023

The thermals are impressive, but is it worth the sacrifice in portability?

A Vietnamese TikToker has gone through the arduous effort of strapping a full-blown 240mm AIO liquid cooler onto a Steam Deck handheld gaming console. The video shows the entire creation process, which involved building a custom baseplate for the Deck and drilling out part of the rear clamshell to make room for the AIO. However, after all that hard work, thermals dropped by 32%, giving the Steam Deck's little Van Gough APU more than enough thermal headroom to hit peak boost clocks.

Despite its success, this mod is not for the faint of heart and required drilling and damaging the Steam Deck outer shell. If you value your Steam Deck's longevity, this is something you probably should not attempt to try.

The Tiktoker created this mod with only a couple of parts, making this mod pretty simple. To start, he created a custom heat spreader from metal designed to be sandwiched between the Decks' metal cooling solution and the AIO pump itself to allow effective heat transfer between the two components.

Next, he dremeled a square out of the Steam Decks' rear clamshell, exposing the outer part of the APUs cooling solution, and securely mounted the metal heat spreader to the Deck's back cutout, securing it with four screws as well. Then two thermal pads were placed on the top and bottom of the makeshift heat spreader before the modified outer shell was put back onto the Steam Deck. Finally, the pump was connected to the makeshift heat spreader with the same four screws.

To no one's surprise, the mod worked very well, dropping the CPU and GPU temps from around 85C on average to roughly 60C. At this temperature, the Steam Deck's CPU and GPU should be able to hit peak boost clocks without any problems as long as enough power is available for both components.

Using a liquid cooler is about as extreme as you can get for the Steam Deck, providing more than 15 times the amount of cooling Deck's SoC requires (assuming the AIO is rated at 250W of heat dissipation). This mod proves how ridiculously easy it is to cool the Deck with desktop CPU cooling. I'm sure we'll see far more optimized custom coolers for the Deck, featuring something like a low-profile air cooler, which would offer substantially better portability and still offer very good thermals, especially if thermal paste is used.

Join the experts who read Tom's Hardware for the inside track on enthusiast PC tech news — and have for over 25 years. We'll send breaking news and in-depth reviews of CPUs, GPUs, AI, maker hardware and more straight to your inbox.

Aaron Klotz is a freelance writer for Tom's Hardware US, covering news topics related to computer hardware such as CPUs, and graphics cards.

Best Resin 3D Printers in 2023

Apple's M2 Ultra Seemingly Can't Beat AMD and Intel Rivals

Best 3D Printers 2023: FDM, Resin and Sub-$250 Models

By Aaron KlotzJune 09, 2023

By Ash HillJune 09, 2023

By Francisco PiresJune 09, 2023

By Aaron KlotzJune 09, 2023

By Ash HillJune 08, 2023

By Ash HillJune 08, 2023

By Aaron KlotzJune 08, 2023

By Mark TysonJune 08, 2023

By Brandon HillJune 08, 2023

By Anton ShilovJune 08, 2023

By Mark TysonJune 08, 2023